High-Strength Cementitious Grout

High-Strength Cementitious Grout
Home/Shop/Repair & Strengthening Mortars/High-Strength Cementitious Grout

A high-strength, non-shrink cementitious grout for filling voids, supporting base plates, anchoring equipment and transferring static or dynamic loads in construction and industrial projects.

Description

High-Strength Cementitious Grout

Abrock Poshesh High-Strength Cementitious Grout is an engineered, flowable and non-shrink mortar intended to fill confined spaces and provide continuous support beneath structural and mechanical components. After mixing with the specified amount of clean water, it produces a homogeneous grout capable of flowing into narrow gaps and irregular voids.

Key characteristics

  • Non-shrink performance to reduce the risk of gaps after hardening
  • High compressive strength for demanding structural and industrial applications
  • Good flowability and filling capability
  • Strong bond to properly prepared concrete, steel and mineral substrates
  • Suitable for loads and vibration where a continuous bearing surface is required

Typical applications

  • Grouting beneath steel base plates and columns
  • Supporting machinery and industrial equipment foundations
  • Anchoring bolts, rails and structural components
  • Filling cavities, recesses and inaccessible spaces
  • Bridge bearings, precast connections and heavy-duty foundations

Application guidance

The substrate must be sound, clean and free from dust, oil, laitance and loose material. Concrete surfaces should be prepared and preconditioned as required by the technical method statement. Mix only with the specified amount of water and place continuously from one side to minimize trapped air. The required consistency, placement thickness and curing procedure must be determined according to the product data sheet and project conditions.

Important note

Final strength and performance depend on water dosage, temperature, substrate preparation, placement method and curing. Product selection and application should therefore follow the approved technical specification for each project.

Add a review

Your email address will not be published. Required fields are marked *

☆ ☆ ☆ ☆ ☆

No comments yet.

Adding to cart...

Product added successfully!

Cart
Your cart is empty!

Your cart is empty!